Catalytic Converter

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Catalytic Converter [Re: Jeepeater] #877671 09/03/08 04:01 AM

Joined: Aug 2000

Posts: 4,868

Mount Vernon, WA, USA

Jim_Paget

Roll Me Over

Welding won't do you any good unless you put a skid pan under it. We had two cut out in the same day in our parking lot at work. A battery powered sawzall can do the job in seconds, and I understand there is some other kind of tool that is even quicker.

Jim Paget
88 YJ with a few changes

www.rrr4x4.com

Entire Thread
Subject	Posted By	Posted
Catalytic Converter	cel36	03/27/08 02:34 PM
Re: Catalytic Converter	shtkicker	03/29/08 04:04 AM
Re: Catalytic Converter	93montero_sr	05/01/08 11:27 PM
Re: Catalytic Converter	hazy_daze	05/01/08 11:56 PM
Re: Catalytic Converter	93montero_sr	05/02/08 06:58 AM
Re: Catalytic Converter	Jeepeater	09/02/08 01:20 AM
Re: Catalytic Converter	Jim_Paget	09/03/08 04:01 AM
Re: Catalytic Converter	bombardj1	09/08/08 12:53 PM

Moderated by 4x4Wire, PHIL_

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.661s Queries: 16 (3.659s) Memory: 0.6074 MB (Peak: 0.6404 MB) Data Comp: Off Server Time: 2026-06-16 10:57:35 UTC
Valid HTML 5 and Valid CSS