Low compression on 2 and 3 cylinders

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Low compression on 2 and 3 cylinders [Re: DamKia] #878458 04/01/08 09:33 PM

Joined: Apr 2007

Posts: 15

Melbourne Australia

Andrew_Main Offline

Need a Spot

I'll have to have a look when I get the car back. From what I remember number 1 was just grey but I can't remember the others. There was no water in the oil though.

From what I read in the online manual the compression is supposed to be ~185psi??? Does this mean all my cylinders are way below this or am I reading the manual incorrectly?

Cheers

Andrew

Entire Thread
Subject	Posted By	Posted
Low compression on 2 and 3 cylinders	Andrew_Main	04/01/08 12:00 PM
Re: Low compression on 2 and 3 cylinders	Iron	04/01/08 01:33 PM
Re: Low compression on 2 and 3 cylinders	Andrew_Main	04/01/08 01:47 PM
Re: Low compression on 2 and 3 cylinders	DamKia	04/01/08 02:56 PM
Re: Low compression on 2 and 3 cylinders	Andrew_Main	04/01/08 09:33 PM
Re: Low compression on 2 and 3 cylinders	DamKia	04/02/08 08:28 AM
Re: Low compression on 2 and 3 cylinders	Sportage	04/02/08 10:48 AM

Moderated by 4x4Wire, Axe Man, DamKia

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.781s Queries: 16 (3.779s) Memory: 0.6059 MB (Peak: 0.6389 MB) Data Comp: Off Server Time: 2026-06-12 16:37:46 UTC
Valid HTML 5 and Valid CSS