Spring over

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Spring over #878604 04/02/08 12:17 AM

Joined: Nov 2007

Posts: 26

Florida

US_Marshal Offline

Getting the Wheeling Fever

I started my spring over to day. It took about 2 hours to get the springs out and axle cleaned up for a new set perches to be welded on. On reassembly I ran into a little snag, The upper shackle bolt is seized in the bushing and I cant get it to turn down to fit the lower bolt through the hole. Is it normal for only the upper bolt to be stuck? Any one have an idea of how to get it loosened up? short of torching out the bushing

http://gearheads.987mb.com/

Entire Thread
Subject	Posted By	Posted
Spring over	US_Marshal	04/02/08 12:17 AM
Re: Spring over	BroncosFan	04/02/08 02:40 AM
Re: Spring over	mlclark	04/02/08 03:22 AM
Re: Spring over	US_Marshal	04/03/08 04:37 AM
Re: Spring over	strawmyers	04/03/08 11:22 AM
Re: Spring over	US_Marshal	04/07/08 05:11 AM
Re: Spring over	randii	04/08/08 01:53 AM

Moderated by 4x4Wire, houlster, jezeric, Jim_Paget, strawmyers

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 5.424s Queries: 15 (5.422s) Memory: 0.6053 MB (Peak: 0.6383 MB) Data Comp: Off Server Time: 2026-10-28 15:21:18 UTC
Valid HTML 5 and Valid CSS