Quote
I just did it.......pb blaster, digital camera, colored zip ties or some other method of marking the vac lines that wont rub off! Torque wrench, water pump, new thermostat, fuel filter. BE CAREFUL WITH THE THERMOVALVE!!!! I learned the hard way <img src="/forums/images/graemlins/smile.gif" alt="" /> I have a bunch of locking manifold nuts if you need extra, I bought a bag of 100 cause it was cheaper to do that than spend 89cents a nut. Good luck....Im still not done yet!

cjm <img src="/forums/images/graemlins/cheers.gif" alt="" /> <img src="/forums/images/graemlins/kewl.gif" alt="" />


Cool, thanks bud! i run a weber, so no vacuum lines under my hood, when i did the bottom end, everything, and i mean, everything from oil pump to bolts was new. My project ran out of time at the zero hour last year and i cheaped out on a wrecker head instead of waiting to get a clearwater shipped up, i paid for it when i overheated last year and cracked the head to high heaven.

Good luck to you too bro!

'09 Acura TSX Tech Package
'05 Blazer (Company hauler)
Retired '88 Bada$$ edition Raider (now owned by shadowgear)