Manifold to exhaust pipe seal.

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Manifold to exhaust pipe seal. [Re: EtienneNavaar] #879049 04/07/08 04:58 PM

Joined: Sep 2003

Posts: 1,686

Phoenix, Az

Staceman

Body Damage is Cool

Been there, done that man. Those 2 little donuts?
I have ONLY been successful with OEM, or, the ones
that come in EB's kit, very close match compared to any parts store type I've ever tried. Also, the next time you do those dudes, pull the entire downpipe off, and look for a crack in the area where the 2 pipes connect into one. If you got a crack in there, get her welded up.

85 4Runner - With NEW Marlin 4.7 Gears!! It's a whole new beast!

Entire Thread
Subject	Posted By	Posted
Manifold to exhaust pipe seal.	EtienneNavaar	04/05/08 12:19 AM
Re: Manifold to exhaust pipe seal.	Staceman	04/07/08 04:58 PM

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.444s Queries: 16 (3.443s) Memory: 0.5944 MB (Peak: 0.6274 MB) Data Comp: Off Server Time: 2026-06-01 19:30:38 UTC
Valid HTML 5 and Valid CSS