Using a 3.4 HT crate engine

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Using a 3.4 HT crate engine [Re: tomjarz] #879935 04/20/08 02:15 PM

Joined: Mar 2008

Posts: 9

HondaGuy

Need a Spot

The fuel delivery statement is for emissions only. the other option instead of the 4.3 throttle body is the Holley TB. it has adjustable fuel pressure regulator as well as higher flow injectors. it is also larger bore. A bit pricey though...

Entire Thread
Subject	Posted By	Posted
Using a 3.4 HT crate engine	tomjarz	04/09/08 02:41 PM
Re: Using a 3.4 HT crate engine	Van	04/09/08 07:18 PM
Re: Using a 3.4 HT crate engine	HondaGuy	04/20/08 02:15 PM
Re: Using a 3.4 HT crate engine	Nick Muzzio	06/16/08 06:01 AM

Moderated by 4x4Wire, houlster, jezeric, Jim_Paget, strawmyers

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.483s Queries: 16 (3.481s) Memory: 0.5980 MB (Peak: 0.6309 MB) Data Comp: Off Server Time: 2026-06-09 03:57:39 UTC
Valid HTML 5 and Valid CSS