Extreme Terrain
4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums


Previous Thread
Next Thread
Print Thread
Rate Thread
Reality Check #880003 04/10/08 05:03 AM
Joined: Dec 2003
Posts: 67
rumrunner Offline OP
Getting the Wheeling Fever
This probably isn't an unusual occurance, but I thought I should check to see if I was being too much of an <img src="/forums/images/graemlins/butwiggle.gif" alt="" /> in my "correspondence" with autopartswarehouse.com. I think I spelled out the situation clearly below, except for my initial contact over the phone with some kid who sounded rushed to be done with the call and assured everything would be taken care of.

Seeing as I've had two people in their customer service basically blow me off without actually addressing my complaint, I'm wondering if this is typical for online auto places? Any other online merchant I've used has been very pro-active about dealing with mistakes, one way or the other.

Am I an idiot for not going by the picture for my order? I guess I should have followed some advice I saw here and just gone to Advance. I'll probably have to do that this weekend anyway...

***************************
<Copy to 4x4Wire.com discussion forums>

Dear Ramil~
I went to your Web site, entered the information for my vehicle, and
selected the part from the list shown. If you examine the attached JPEG
image, the part clearly indicates that it "fits" a 6 cylinder vehicle.
Are you implying that I should be running my 6 cylinder engine with only
4 cylinders connected to the ignition coil?!? I could buy an axle
assembly for a VW beetle and say it would "fit" in the bed of my truck,
but that doesn't have much meaning in the context of a retailer-client
relationship. I would expect to pay the price difference to obtain the
correct set with the extra wires, but I fail to comprehend how you could
not consider your listing to be in error.

~Jeff Wala

On Wed, 9 Apr 2008 09:39:56 -0700, "Ron"
<customerservice@autopartswarehouse.com> said:
>
> Dear Jeff,
>
> This is to inform you that we have received and reviewed your request for
> return shipping reimbursement. At the present time, we only reimburse
> return shipping expenses if the return was a direct result of our error.
> After reviewing your order and the reason for return, we have determined
> that your return does not meet our qualifications for return shipping
> reimbursement at this time. Therefore, we regret to inform you that your
> request to be reimbursed for your return shipping expenses has been
> denied.
> If you feel that we've made any error in judgment in this case, please
> reply to this e-mail with a detailed account of our error/s and we will
> re-evaluate our decision.
> We are sorry for this inconvenience and hope that you will continue to
> shop with us in the future.
>
> Ramil
> Customer Service
>
>
> --- Original Message ---
> From: "Jeff Wala" <jwala@fastmail.fm>
> Received: 4/8/08 12:04:07 PM PDT
> To: shipping@autopartswarehouse.com
> Subject: Re: Parts return authorization for order # 4153693
>
> Dear Sirs~
> Would you care to clarify what is going on with this order? I ordered a
> part for my vehicle based upon information on your Web site that proved
> to be inaccurate. Do you plan to send me the correct wires for my car?
> Currently, the ignition coil wire from the original order is allowing my
> truck to start somewhat reliably, so it would be greatly appreciated if
> you would compensate for your error by shipping me the correct 6
> cylinder wire set I attempted to order. I will then include the new coil
> wire from that shipment in my return of the 4 cylinder set.
>
> Am I expected to pay shipping for the return myself even though the
> mistake was due to erroneous information on your site? Not having
> reliable wires on my vehicle during the wet spring weather is proving to
> be a major inconvenience to me. Your customer service currently appears
> embarrassing, I'd hope you have interest in preventing that from
> becoming disastrous.
>
> Sincerely,
> ~Jeff Wala
>
>
>
> On Mon, 24 Mar 2008 08:56:17 -0400 (EDT),
> shipping@autopartswarehouse.com said:
> > Please Read Carefully!
> > You are receiving this e-mail, because one of the following
> > pertains to your order.
> > 1. You applied for an RMA number to return a part.
> > 2. You returned your order without an RMA number. (An RMA number
> > is automatically issued on receipt of your return.)
> > 3. A claim was filed with the shipper on your lost, stolen,
> > missing, or damaged part.
> > IMPORTANT!
> > DO NOT SEND ANY OTHER NEW OR DEFECTIVE PARTS WITH THIS RETURN.
> > YOU WILL NOT RECEIVE CREDIT FOR ANY ITEMS NOT LISTED BELOW.
> > If you have other parts to return, you will have to apply for a
> > separate RMA number.
> > SEND YOUR RETURN HERE!
> > Fulfillment Warehouse
> > Your RMA Number is: 4210584
> > 17150 South Margay Ave
> > Dock Door 1
> > Carson, CA 90746
> > Attention Returns:
> > PARTS FOR THIS CREDIT
> > 1990-1996 Mitsubishi Mighty Max Bosch Ignition Wire Set Ignition
> > Wire Set Price: $24.95 Qty: 1 Part #: W0133-1625913
> > Order ID: 4153693
> > Discount: 0.00
> > Credit Amount: 24.95
> > Your RMA# is listed above. You must mark this RMA# clearly on the
> > outside of the SHIPPING BOX in black marker to receive credit for
> > your return.
> > WHAT TO INCLUDE WITH YOUR RETURN:
> > At the time of your purchase we emailed you an itemized invoice.
> > Please print the invoice and circle the items that you are
> > returning and enclose it with your return. Do not enclose
> > shipping receipts of any kind.
> > CONDITION OF RETURN:
> > Parts must be returned in their original boxes. Any returns
> > received without the original boxes are not in resellable
> > condition and will be returned to you. Drain all fluids.
> > DO NOT WRITE ON THE PART BOXES OR USE TAPE ON THE PART BOXES. All
> > writing must be done on the shipping boxes only. Any returns
> > received in this condition will not be considered in resellable
> > condition and will be returned to you.
> > If you received your item in a parts box, please put your RMA
> > number on a piece of removable masking tape. When taping the box,
> > please tape the box exactly the way it was taped when you
> > received it; or place your return in a cardboard shipping box.
> > HOW TO SHIP YOUR RETURN: IMPORTANT:
> > Please make sure you properly package your return. We cannot be
> > responsible for items damaged or lost in shipment. We recommend
> > that you insure your package for what it is worth. (No
> > responsibility taken for items uninsured)
> > You may use the shipper of your choice (UPS, Fed Ex, USPS, DHL)
> > however we highly recommend that you obtain a tracking number.
> > If shipping via USPS, you MUST obtain a return tracking number.
> > Delivery confirmations and return receipts do not provide a
> > signature or an accurate proof of delivery to the specified
> > address.
> > You are responsible for all return shipping charges. We do not
> > have return shipping tags, nor will shipping charges be
> > reimbursed.
> > PLEASE NOTE: Credit can take up to 4 WEEKS from the date your
> > return is received.
> > Thank you for your business.

> ------ Please do not remove your unique tracking number! ------
> <<#114561-535217#>>
attachment


1992 Mighty Max 4x4
3.0 5-speed
Herculined bed
Re: Reality Check [Re: rumrunner] #880004 04/10/08 05:13 PM
Joined: Feb 2005
Posts: 7,458
rxinhed Offline
Trail Leader
*****
Nothing against online ordering and assumed trust/accuracy of the vendor's information, for electrical parts there's nothing like face to face with the counter guy and handling the parts before you leave. I sold retail parts, working for a number of mom & pop's, most customers had their favorite counter guy. I discovered lots of mis-boxed parts...spark plugs, wires, caps...that cold usually be traced to quality control at the factory. I'm not trying to bag on internet sales/purchases, I sell a lot of Montero parts here for example. The vendor is probably just trying to cover themselves because the return charges they pay to the supplier can be high. Two of my local fav parts stores just closed up, cost of doing business was too high.

Keep trying. Squeaky wheels get greased.


1987 Raider - Roxy
1988 Mighty Max 2.6L Turbo - Pearl
1997 Mountaineer V8 - Freddy
2000 Excursion V10 - Freya
Re: Reality Check [Re: rxinhed] #880005 04/10/08 05:44 PM
Joined: May 2005
Posts: 927
8
89IsMine Offline
Rock Warrior
*****
Quote
Keep trying. Squeaky wheels get greased.


Yeah, the squeaky non-sarcastic wheel!

I'd suggest just politely sticking to your guns regardless of how ridiculous they seem to be behaving. I doubt the brilliancy of witty comments like... Are you implying that I should be running my 6 cylinder engine with only 4 cylinders connected to the ignition coil?!? I could buy an axle assembly for a VW beetle and say it would "fit" in the bed of my truck... will induce a sudden enlightenment and change of heart on the part of autopartswarehouse.com workers. <img src="/forums/images/graemlins/rolleyes.gif" alt="" />

Be polite, stick to the facts, ask to speak with managers. You may get better results <img src="/forums/images/graemlins/kewl.gif" alt="" />

Eric W.

Last edited by 89IsMine; 04/11/08 12:25 AM.

'89 Dodge Raider -- 3.0L V6, MT, SWB
Re: Reality Check [Re: 89IsMine] #880006 04/10/08 09:55 PM
Joined: Feb 2005
Posts: 1,511
ryany Offline
Body Damage is Cool
x2.

Get on the phone with them, have all your information at hand, and explain the situation clearly & politely to whomever you are dealing with.

If you don't get a satifactory result, politely ask for his/her manager.

Repeat as necessary until you get someone with a brain who has the authority to take care of you properly.

Usually works for me.


95 Montero SR
3.8 MIVEC, Advance headers, 2 1/2" exhaust, Magnaflow muffler, OME shocks & rear springs, 2" body lift, 3" tank lift, 4.90s, TRE front locker, factory rear locker, Roger Brown Rock Sliderz, 315/75r16 (35") tires, Sport big brakes
Re: Reality Check [Re: rxinhed] #880007 04/11/08 03:15 AM
Joined: Dec 2003
Posts: 67
rumrunner Offline OP
Getting the Wheeling Fever
Quote
Nothing against online ordering and assumed trust/accuracy of the vendor's information, for electrical parts there's nothing like face to face with the counter guy and handling the parts before you leave. I sold retail parts, working for a number of mom & pop's, most customers had their favorite counter guy. I discovered lots of mis-boxed parts...spark plugs, wires, caps...that cold usually be traced to quality control at the factory. I'm not trying to bag on internet sales/purchases, I sell a lot of Montero parts here for example. The vendor is probably just trying to cover themselves because the return charges they pay to the supplier can be high. Two of my local fav parts stores just closed up, cost of doing business was too high.

Which brings up a more important point - how to track down a respectable local store to support. I ordered from this place because I suspected the only economic impact on my community would be whether some high-school kid at Advance would get minimum wage to give me the part or if a UPS driver would pocket some of the change. Is there an simple way to find local, reliable part dealers short of footwork and trial-and-error?

With the flood of advertising $$ I don't find Google to be much help to this end. As a positive example, I've been told that True Value hardware stores are organized in such a way that a sigificant portion of management and ownership profits stay in the local community. Are any of the auto part chains similar? Anyone know of a good MomNPop part store around Milwaukee?


1992 Mighty Max 4x4
3.0 5-speed
Herculined bed
Re: Reality Check [Re: rumrunner] #880008 04/11/08 04:20 AM
Joined: Dec 2001
Posts: 11,727
LRJ4x4 Offline
Web Wheeler
*****
Does WINCAPS cover the 92 MightMax. If so get WINCAPS, plug in your VIN and then order by factory part number from Mitsubishiparts.net. <img src="/forums/images/graemlins/patriot.gif" alt="" />

I've never had a problem


98 Montero with cold weather package
96 Toyota Land Cruiser, fully locked Mall Machine :-)
Re: Reality Check [Re: LRJ4x4] #880009 04/11/08 06:40 AM
Joined: Nov 2002
Posts: 7,892
stony-man Offline
Web Wheeler
*****
True dat. Just got my wheel bearings and bits, and lower ball joints today from them. All was as should be. Cheaper by much than any local dealers, and I don't have to pay tax either. <img src="/forums/images/graemlins/smile.gif" alt="" />

Re: Reality Check [Re: 89IsMine] #880010 04/14/08 04:13 AM
Joined: Dec 2003
Posts: 67
rumrunner Offline OP
Getting the Wheeling Fever
Quote
Quote
Keep trying. Squeaky wheels get greased.


Yeah, the squeaky non-sarcastic wheel!

I'd suggest just politely sticking to your guns regardless of how ridiculous they seem to be behaving. I doubt the brilliancy of witty comments like... Are you implying that I should be running my 6 cylinder engine with only 4 cylinders connected to the ignition coil?!? I could buy an axle assembly for a VW beetle and say it would "fit" in the bed of my truck... will induce a sudden enlightenment and change of heart on the part of autopartswarehouse.com workers. <img src="/forums/images/graemlins/rolleyes.gif" alt="" />

I'd like to beg to differ - if I was being sarcastic I would have said something about how much I was enjoying sputtering around town with a third of my engine's cylinders not firing. I thought my comment there was a rather straight forward attempt to question the logic of their statements: Their website says the part fits a 6 cylander vehicle, yet they claim to have made no error. Therefore they seem to either be implying what I stated or are anticipating someone wanting 5 of 7 wires for their vehicle, which seems to me too improbable to consider.

I could have been less rude, but after spending an hour that morning pushing the truck around my neighborhood looking for a big enough hill to bumpstart it, I could have cared less about the $25. I'd be happier knowing others were less likely to end up dealing with this company's semi-competence. Of course, I guess people around here would be more likely to notice contextual clues than to focus on specifics like I did...

Last edited by rumrunner; 04/14/08 05:42 AM.

1992 Mighty Max 4x4
3.0 5-speed
Herculined bed
Re: Reality Check [Re: rumrunner] #880011 04/14/08 03:14 PM
Joined: May 2007
Posts: 4,628
hazy_daze Offline
Roll Me Over
*****
Don't ever try to apply for any government benefits <img src="/forums/images/graemlins/ignore.gif" alt="" />

From the looks of the reply you got, it was a canned automated response. To see if you had the perseverance to go again. It's a game. BTW, did you notice the names of the people responding? Looks like they may be from south Georgia..... <img src="/forums/images/graemlins/rolleyes.gif" alt="" /> I've called this company before trying to locate weird and difficult parts not available thru my normal channels. Felt like I was a call in on Radio Pakistan.

Try going to your local independent auto parts store to get some real parts. (Advance doesn't count... <img src="/forums/images/graemlins/wink.gif" alt="" />)


Fasteddy's advice is occasionally sound...
Re: Reality Check [Re: hazy_daze] #880012 04/14/08 11:24 PM
Joined: Jan 2001
Posts: 13,649
fasteddy Offline
Web Wheeler
*****
Haxy Daze works with NAPA, which is a good parts store. Most every town with several repair shops has a good pro parts house. They hate re-doing alternators for free, too.

I'd call around and check with any good local general mech shops for who they use.


Not responsible for advice not taken...







4x4Wire Social:

| 4x4Wire on FaceBook |


OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

Powered by UBB.threads™ PHP Forum Software 7.7.3
(Release build 20190728)
PHP: 7.4.33 Page Time: 0.017s Queries: 15 (0.012s) Memory: 0.6498 MB (Peak: 0.7899 MB) Data Comp: Off Server Time: 2026-11-20 00:53:03 UTC
Valid HTML 5 and Valid CSS