CEL light on, new O2 sensor?

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: CEL light on, new O2 sensor? [Re: DamKia] #880426 04/12/08 03:08 PM

Joined: Jun 2006

Posts: 3,814

South Texas

Hydra747

Roll Me Over

I had the same problem codes show after buying two new sensors and post replace-ment.

My remedy was ...spraying electrical de-greaser on the connectors (it is quick dry).

My problem never came back! <img src="/forums/images/graemlins/kewl.gif" alt="" />

The can of d-degreaser was about $4.00 .......

Last edited by Hydra747; 04/12/08 03:09 PM.

Entire Thread
Subject	Posted By	Posted
CEL light on, new O2 sensor?	Beater_Sportage	04/12/08 01:27 AM
Re: CEL light on, new O2 sensor?	DamKia	04/12/08 11:07 AM
Re: CEL light on, new O2 sensor?	Hydra747	04/12/08 03:08 PM
Re: CEL light on, new O2 sensor?	Nukeiridium	04/12/08 07:06 PM

Moderated by 4x4Wire, Axe Man, DamKia

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.424s Queries: 16 (3.422s) Memory: 0.5978 MB (Peak: 0.6308 MB) Data Comp: Off Server Time: 2026-05-31 02:53:14 UTC
Valid HTML 5 and Valid CSS