86 22r rough running--new head--cam placement?

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: 86 22r rough running--new head--cam placement? [Re: engnbldr] #880646 04/14/08 12:40 AM

Joined: Nov 2004

Posts: 51

Anchorage Alaska

RustNeverSleeps Offline

Getting the Wheeling Fever

Hi EB,
I marked everything with an indelible marker before I took it all apart: eccentic, sprocket, chain. I lined the pin up to fit the "before" configuration and checked to ensure piston 1 was @ TDC. The pin was @ 12:00, but I don't know what timing mark you are referring to, that is supposed to be at 1130. Can you clarify? Thnx...Rusty

Entire Thread
Subject	Posted By	Posted
86 22r rough running--new head--cam placement?	RustNeverSleeps	04/13/08 08:12 PM
Re: 86 22r rough running--new head--cam placement?	engnbldr	04/13/08 09:50 PM
Re: 86 22r rough running--new head--cam placement?	RustNeverSleeps	04/14/08 12:40 AM
Re: 86 22r rough running--new head--cam placement?	engnbldr	04/14/08 05:07 AM
Re: 86 22r rough running--new head--cam placement?	GOI87	04/15/08 06:36 PM

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.492s Queries: 16 (3.489s) Memory: 0.5996 MB (Peak: 0.6326 MB) Data Comp: Off Server Time: 2026-06-18 00:02:42 UTC
Valid HTML 5 and Valid CSS