86 22r rough running--new head--cam placement?

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: 86 22r rough running--new head--cam placement? [Re: RustNeverSleeps] #880647 04/14/08 05:07 AM

Joined: Jun 2003

Posts: 3,576

1800 acre island at the Oregon...

engnbldr

Roll Me Over

>>>*If the alignment pin is at 12 O'clock with the engine at TDC you should be good there. The actual top timing mark is on the gear itself, a dot or mark just left of the dowel pin as you face it.

Just covering possible bases, it's best to be sure the foundation is sound before checking out tuning and sensors, etc....*EB

*Beats the he** outa me!....*LOL**...

Entire Thread
Subject	Posted By	Posted
86 22r rough running--new head--cam placement?	RustNeverSleeps	04/13/08 08:12 PM
Re: 86 22r rough running--new head--cam placement?	engnbldr	04/13/08 09:50 PM
Re: 86 22r rough running--new head--cam placement?	RustNeverSleeps	04/14/08 12:40 AM
Re: 86 22r rough running--new head--cam placement?	engnbldr	04/14/08 05:07 AM
Re: 86 22r rough running--new head--cam placement?	GOI87	04/15/08 06:36 PM

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.783s Queries: 16 (3.781s) Memory: 0.6022 MB (Peak: 0.6352 MB) Data Comp: Off Server Time: 2026-06-17 16:12:56 UTC
Valid HTML 5 and Valid CSS