Rod bolt failure

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Rod bolt failure [Re: Staceman] #880801 04/14/08 05:23 PM

Joined: Dec 2006

Posts: 233

Mankato, MN, USA

Vanishing_Point Offline

Wheeler

I know of several rebuilts with reused rod bolts and no problems. Unless they were subjected to high forces, (overtightening included), they should be fine.

Entire Thread
Subject	Posted By	Posted
Rod bolt failure	trashcanman	04/14/08 05:51 AM
Re: Rod bolt failure	toyomorph	04/14/08 03:24 PM
Re: Rod bolt failure	Staceman	04/14/08 05:19 PM
Re: Rod bolt failure	Vanishing_Point	04/14/08 05:23 PM
Re: Rod bolt failure	engnbldr	04/14/08 09:28 PM

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.486s Queries: 16 (3.484s) Memory: 0.6000 MB (Peak: 0.6330 MB) Data Comp: Off Server Time: 2026-06-03 06:07:05 UTC
Valid HTML 5 and Valid CSS