m23x1.25 tap

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: m23x1.25 tap [Re: ZUK] #880833 04/14/08 05:21 PM

Joined: Dec 2006

Posts: 233

Mankato, MN, USA

Vanishing_Point Offline

Wheeler

So far I have found right hand thread m23x1.5, 2.0, and 3.0. With my discount I can get them for $40. But it is pointless if it isn't the right thread pitch. I am pretty sure that it is m23x1.25. That should be the diameter and thread pitch of the fj-80 tres.

Entire Thread
Subject	Posted By	Posted
m23x1.25 tap	Vanishing_Point	04/14/08 07:04 AM
Re: m23x1.25 tap	4Crawler	04/14/08 04:03 PM
Re: m23x1.25 tap	MAC	04/14/08 04:43 PM
Re: m23x1.25 tap	ZUK	04/14/08 05:03 PM
Re: m23x1.25 tap	Vanishing_Point	04/14/08 05:21 PM
Re: m23x1.25 tap	Vanishing_Point	04/15/08 05:57 AM

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.440s Queries: 16 (3.438s) Memory: 0.6026 MB (Peak: 0.6355 MB) Data Comp: Off Server Time: 2026-06-02 12:46:13 UTC
Valid HTML 5 and Valid CSS