pulling a 2.6 motor

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: pulling a 2.6 motor [Re: cjsmontero] #881227 04/16/08 07:56 PM

Joined: Apr 2002

Posts: 3,622

Brookfield, WI

NathanC

Roll Me Over

You have to pull the starter. There's a thin steel plate between the engine and trans. It's also between the starter and trans. If you fail to pull the starter, the engine isn't going anywhere. <img src="/forums/images/graemlins/shiner.gif" alt="" />

Probably not worth the hassle to lower the engine first.

'06 Dakota QC 4.7 6sp 4x4
'88 Mighty Max
'77 KZ1000 fun old bike

Entire Thread
Subject	Posted By	Posted
pulling a 2.6 motor	cjsmontero	04/16/08 06:08 AM
Re: pulling a 2.6 motor	NathanC	04/16/08 01:46 PM
Re: pulling a 2.6 motor	rxinhed	04/16/08 03:06 PM
Re: pulling a 2.6 motor	jerzboy	04/16/08 03:06 PM
Re: pulling a 2.6 motor	jerzboy	04/16/08 03:08 PM
Re: pulling a 2.6 motor	cjsmontero	04/16/08 07:38 PM
Re: pulling a 2.6 motor	NathanC	04/16/08 07:56 PM
Re: pulling a 2.6 motor	ForcedAir_Montero	04/17/08 03:40 PM
Re: pulling a 2.6 motor	rxinhed	04/18/08 01:14 AM
Re: pulling a 2.6 motor	1967david	04/20/08 09:22 AM
Re: pulling a 2.6 motor	rxinhed	04/20/08 04:38 PM
Re: pulling a 2.6 motor	1967david	04/22/08 11:28 PM
Re: pulling a 2.6 motor	87Raider_TSI	10/27/08 06:55 PM
Re: pulling a 2.6 motor	MontyMcV	10/27/08 07:23 PM
Re: pulling a 2.6 motor	87Raider_TSI	10/27/08 08:59 PM
Re: pulling a 2.6 motor	dadrab	10/27/08 09:12 PM
Re: pulling a 2.6 motor	87Raider_TSI	10/27/08 10:19 PM
Re: pulling a 2.6 motor	MontyMcV	10/27/08 10:40 PM
Re: pulling a 2.6 motor	dadrab	10/28/08 05:28 PM
Re: pulling a 2.6 motor	MontyMcV	10/28/08 05:39 PM
Re: pulling a 2.6 motor	dadrab	10/28/08 05:50 PM
Re: pulling a 2.6 motor	WagonMaster	10/28/08 05:59 PM
Re: pulling a 2.6 motor	MontyMcV	10/28/08 06:59 PM
Re: pulling a 2.6 motor	WagonMaster	10/28/08 10:53 PM
Re: pulling a 2.6 motor	Cochese	10/29/08 01:53 AM
Re: pulling a 2.6 motor	MontyMcV	10/28/08 07:01 PM
Re: pulling a 2.6 motor	fasteddy	10/28/08 08:08 PM
Re: pulling a 2.6 motor	dadrab	10/28/08 08:20 PM
Re: pulling a 2.6 motor	87Raider_TSI	10/28/08 10:45 PM
Re: pulling a 2.6 motor	CwnAnwyn	10/29/08 09:38 PM
Re: pulling a 2.6 motor	hazy_daze	10/30/08 01:42 PM
Re: pulling a 2.6 motor	Trooper-san	10/28/08 05:11 PM

Moderated by 4x4Wire, Macka, Mudraider, off-roader, PHIL_, rxinhed

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 5.128s Queries: 16 (3.508s) Memory: 0.6647 MB (Peak: 0.7033 MB) Data Comp: Off Server Time: 2026-05-28 01:38:49 UTC
Valid HTML 5 and Valid CSS