more on: rough running--new head--cam placement?

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: more on: rough running--new head--cam placement? [Re: RustNeverSleeps] #881776 05/03/08 06:41 PM

Joined: Nov 2004

Posts: 51

Anchorage Alaska

RustNeverSleeps Offline

Getting the Wheeling Fever

As memory recalls, I believe that my t.c. setup looked like that pictured. I goofed around with trying to remove a phantom kink in the crank side (bottom) of the chain until I realized that the t.c. was spring loaded and I had to pry the upper sprocket up to get it to slide onto the cam. I am beginning to think I need to tale the timing chain cover off and make sure everything is lined up.

Entire Thread
Subject	Posted By	Posted
more on: rough running--new head--cam placement?	RustNeverSleeps	04/19/08 10:59 PM
Re: more on: rough running--new head--cam placement?	RustNeverSleeps	04/20/08 04:53 AM
Re: more on: rough running--new head--cam placement?	engnbldr	04/20/08 07:36 AM
Re: more on: rough running--new head--cam placement?	RustNeverSleeps	04/20/08 05:03 PM
Re: more on: rough running--new head--cam placement?	toyomorph	04/20/08 05:58 PM
Re: more on: rough running--new head--cam placement?	RustNeverSleeps	05/03/08 06:41 PM
Re: more on: rough running--new head--cam placement?	RustNeverSleeps	05/11/08 12:11 AM
Re: more on: rough running--new head--cam placement?	anotherjeff	05/12/08 06:51 AM

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social: