3.2 DOHC Valve Cover

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: 3.2 DOHC Valve Cover [Re: JLEMOND] #882979 04/30/08 11:29 PM

Joined: Sep 2002

Posts: 336

San Antonio, TX

slappy

Mudrunner

Thanks, Jerry.

I've had the intake manifold off for a while, with the vacuum line to the booster already disconnected. Would it be safe to say that the vacuum has been released from the booster?

-john

99 Rodeo 3.2L 4WD

Entire Thread
Subject	Posted By	Posted
3.2 DOHC Valve Cover	slappy	04/27/08 07:18 PM
Re: 3.2 DOHC Valve Cover	JLEMOND	04/28/08 02:38 PM
Re: 3.2 DOHC Valve Cover	slappy	04/30/08 11:29 PM
Re: 3.2 DOHC Valve Cover	JLEMOND	05/01/08 03:36 AM

Moderated by 4x4Wire, houlster, jezeric, Jim_Paget, strawmyers

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.417s Queries: 16 (3.415s) Memory: 0.5990 MB (Peak: 0.6319 MB) Data Comp: Off Server Time: 2026-05-29 00:05:47 UTC
Valid HTML 5 and Valid CSS