Well, I just got done with my clutch line modification and I thought I would post some pics for you guys. I ordered the hose and fittings from SummitRacing.com.

First off, here are the before pics of the MC, damper, and slave.
[Linked Image]

[Linked Image]
[Linked Image]
[Linked Image]

I used four feet of AN-4 Stainless hose from Aeroquip,
90* aeroquip hose end connected to a 90* ANxfemale adapter because I needed a 180* and I could not find one in size -4
-4AN to 12mmx1.0 adapter for the MC
A straight female aeroquip hose end connected to a 10mm banjo male adapter
10mmx1.0 banjo bolt with 2 crush washers


[Linked Image]
[Linked Image]


The adapters and hose installed on MC...

[Linked Image]


The MC back in location with the hose routed down to the slave....

[Linked Image]
[Linked Image]
[Linked Image]


Well there it is and I must say it works great. Thanks to Pucci and Randii for there helpful posts.