Distributor

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Distributor "O" Ring [Re: Trooper-san] #884081 05/04/08 03:04 AM

Joined: Jan 2006

Posts: 93

Gulf Coast MS and New Orleans

Smorticvs

Getting the Wheeling Fever

I just put a regular donut o ring from autozone on the dist. shaft and slid it up to the mouting surface. I also used grey rtv sealer on the rubber valve cover gasket. Now she don't leak anymore. This is on my '86 Trooper with the 2.3 engine. Seems that a side mounted distributor would be prone to leaks....

Entire Thread
Subject	Posted By	Posted
Distributor "O" Ring	Trooper-san	05/04/08 01:02 AM
Re: Distributor "O" Ring	Smorticvs	05/04/08 03:04 AM

Moderated by 4x4Wire, houlster, jezeric, Jim_Paget, strawmyers

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 5.457s Queries: 16 (3.522s) Memory: 0.5948 MB (Peak: 0.6278 MB) Data Comp: Off Server Time: 2026-07-16 08:42:46 UTC
Valid HTML 5 and Valid CSS