'87 Trooper clutch adjustment

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: '87 Trooper clutch adjustment [Re: Jim_Welsh] #884147 05/04/08 03:54 PM

Joined: Jan 2006

Posts: 93

Gulf Coast MS and New Orleans

Smorticvs

Getting the Wheeling Fever

Try adjusting the cable.
1. Loosen adjusting nuts on cable at firewall just beside brake master cylinder
2. Pull cable forward and tighten
3. Back off nut until there is appx 5mm clearance between firewall and nut
4. Tighten locknuts together

If this doesn't work, then you probably need a clutch

Entire Thread
Subject	Posted By	Posted
'87 Trooper clutch adjustment	Jim_Welsh	05/04/08 08:03 AM
Re: '87 Trooper clutch adjustment	Smorticvs	05/04/08 03:54 PM

Moderated by 4x4Wire, houlster, jezeric, Jim_Paget, strawmyers

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.691s Queries: 16 (3.689s) Memory: 0.5943 MB (Peak: 0.6273 MB) Data Comp: Off Server Time: 2026-06-06 09:38:41 UTC
Valid HTML 5 and Valid CSS