Hey guys, I have a '91 truck and it's got the Automatic Disconnecting Differential System, and I can't seem to find any torque specs for the wheel bearing adjustment and lock nuts on this type of system.

I can find the specs for wheel bearings on manual hubs and automatic locking hubs, but not for ADD.

I put it back together with 45 ft/lbs on the adjusting nut and 60 ft/lbs on the lcok nut, but then realized I was reading the wrong thing. Even though the wheel spins fine by hand at these specs, and the bearings are tight.

Truck is apart right now, so if anybody can help me get it back together tonight with the right torque specs, it would help. Gotta go to work in it tomorrow.

Thanks.