ADD Wheel bearing torque specs

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: ADD Wheel bearing torque specs [Re: 4Crawler] #884193 05/04/08 10:21 PM

Joined: Mar 2006

Posts: 59

L.I. New York

mmcpeck

Getting the Wheeling Fever

Thanks 4Crawler! So it looks like the inner (adjustment) nut should be torqued to 21 ft/lbs, and the outer lock nut should just be snugged up.

Am I reading that right?

Thanks again!

Entire Thread
Subject	Posted By	Posted
ADD Wheel bearing torque specs	mmcpeck	05/04/08 09:25 PM
Re: ADD Wheel bearing torque specs	4Crawler	05/04/08 10:04 PM
Re: ADD Wheel bearing torque specs	mmcpeck	05/04/08 10:21 PM
Re: ADD Wheel bearing torque specs	4Crawler	05/04/08 10:31 PM
Re: ADD Wheel bearing torque specs	mmcpeck	05/04/08 10:36 PM
Re: ADD Wheel bearing torque specs	4Crawler	05/04/08 10:54 PM
Re: ADD Wheel bearing torque specs	mmcpeck	05/04/08 11:41 PM

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.552s Queries: 16 (3.550s) Memory: 0.6057 MB (Peak: 0.6387 MB) Data Comp: Off Server Time: 2026-06-17 14:19:02 UTC
Valid HTML 5 and Valid CSS