3.2 DOHC crankshaft pulley

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

3.2 DOHC crankshaft pulley #884356 05/06/08 03:24 AM

Joined: Mar 2001

Posts: 436

Austin, Texas

smd94trooper Offline

Mudrunner

I got the crankshaft pulley off of my engine and now I'm just wondering, is this part serviceable? I'm guessing this is what is called a bonded hub? Can I press the pulley off of the balancer? If not, then does anyone know of a cheaper place to get it besides Car Part Wholesale ($247)? I haven't had a chance to call St. Charles yet because it's too late tonight.

Crankshaft Pulley
[Linked Image]

Stefan Doerr
'94 Trooper LS
6.5" lift, 33's, G80 and other stuff
http://community.webshots.com/user/smd94trooper

Entire Thread
Subject	Posted By	Posted
3.2 DOHC crankshaft pulley	smd94trooper	05/06/08 03:24 AM
Re: 3.2 DOHC crankshaft pulley	smd94trooper	05/06/08 03:47 AM

Moderated by 4x4Wire, houlster, jezeric, Jim_Paget, strawmyers

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.476s Queries: 15 (3.474s) Memory: 0.5950 MB (Peak: 0.6280 MB) Data Comp: Off Server Time: 2026-07-16 05:36:49 UTC
Valid HTML 5 and Valid CSS