Sounds like good advise and thanks for that.
I have even considered changing out the axle tubes in favor of thicker wall tubes as I am a welder and Machinist by trade so I should be able to do this myself. From what I am hearing it sounds like the tubes and Axles shafts are the weak links on the 20.
But even with doing the work myself I will be out a good $400 and for that would I have an Axle that I could feel good about so I just may run it stock for a while and save up for a D60 or may even look for used 60 and modify build & Beef it up myself. <img src="/forums/images/graemlins/cheers.gif" alt="" />