I don't have any photos that show the sliders from underneath the vehicle. They are designed so they are attached to and touching only the frame, but the inner rail is aligned with the pinch weld on the body with about 1/8" clearance. When the weight of the vehicle bears on them they will flex slightly until they contact the pinch weld thereby distributing the weight into the body as well as the frame. See Roger Brown's website here:
http://www.4crawler.com/4x4/ForSale/RockSliderZ.shtml

95 Montero SR
3.8 MIVEC, Advance headers, 2 1/2" exhaust, Magnaflow muffler, OME shocks & rear springs, 2" body lift, 3" tank lift, 4.90s, TRE front locker, factory rear locker, Roger Brown Rock Sliderz, 315/75r16 (35") tires, Sport big brakes