Quote
The problem is; now that I have my 2" body lift & I want to raise the sliders, I don't see a way to bolt the sliders any higher on the frame. There's no extra space above the location of the existing brackets, and even if there was, it would leave all the holes from the previous mounting position that would need to be welded up again.


Carlos was able to drill another set of holes just lower so he could mount the rails higher to match his body lift. Yes you may want to fill the old holes but it's not really necessary.

Myself, I decided against drilling out the frame rails for a removable mount. I elected to weld the sliders in place. Of course I did the body lift first since it was cheaper to do. <img src="/forums/images/graemlins/kewl.gif" alt="" />

Off Roader
98 Montero with the Winter Package
89 Montero minty clean and reserved for overlanding trips or Cars and Coffee events
96SR (3.15:1 xcase, 35's) gone to the rust gods
96SR Build Up Thread
Old web page
Old web page