OK I just finished removing the rear driveshaft and test driving. As far as i can tell the vibe still exists, the wobble was hard to tell if it was there tho.

When I had the DS out I checked all the u joints, all seemed to be fine, none of the yokes seemed to be bent or such. The u joints moved freely, the double cardan joint area kinda moved oddly, but I chalk it up to its design and if that was it my vibe wouldnt be there with the whole thing removed.

So I checked the rear a bit from the outside. Looks like the guy at the driveshaft shop replaced the stud on there b/c there is a new brass looking nut on there.

Saturday a friend is coming with his 4runner and were gonna swap tires and see if thats it.

Otherwise its gotta be the trans, bellhousing, such. What else could be there near the trans/engine? I did notice this odd looking mount thing behind the transmount that seemed to mount to nothing had broken rubber, but I cant see wtf its for?

1996 T100, Mickey Thomson Classics, Bridgestone Dueler AT 265/75/16, custom offroad KC's.