dana 44 problem

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: dana 44 problem [Re: BobRowe] #885941 05/16/08 04:22 PM

Joined: Oct 2007

Posts: 49

Cincinnati, Ohio

RustyToy

Getting the Wheeling Fever

So the spindles should just pull out after the six bolts are removed? Any tricks to make them slide out easier?

Entire Thread
Subject	Posted By	Posted
dana 44 problem	RustyToy	05/15/08 05:58 AM
Re: dana 44 problem	BobRowe	05/15/08 06:43 AM
Re: dana 44 problem	80CJ	05/15/08 07:12 AM
Re: dana 44 problem	RustyToy	05/15/08 08:09 PM
Re: dana 44 problem	80CJ	05/15/08 09:23 PM
Re: dana 44 problem	Bigbird79	05/15/08 11:17 PM
Re: dana 44 problem	RustyToy	05/16/08 04:05 AM
Re: dana 44 problem	BobRowe	05/16/08 07:08 AM
Re: dana 44 problem	RustyToy	05/16/08 04:22 PM
Re: dana 44 problem	80CJ	05/16/08 07:55 PM

Moderated by 4x4Wire

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.498s Queries: 16 (3.496s) Memory: 0.6120 MB (Peak: 0.6450 MB) Data Comp: Off Server Time: 2026-06-12 18:22:11 UTC
Valid HTML 5 and Valid CSS