So I have been rebuilding my little motor and have just reinstalled the head, but after a little reading I am not sure if I lubed everything up like has been indicated in some recent reads.

Would it hurt anything for me to back them all out and apply the oil to the head of the bolt, and other noted locations, and then reinstall them per the engnbldr method.

I haven't put anything else back on yet so now is the time to do this if I need to.

I did chase all the holes and try to get all the oil out prior to installing the new bolts, but I didn't lube under the heads and I just don't want to open myself up to a premature HG failure.

Any thoughts would be greatly appreciated.

Thanks,
-Tucker