4.2L header bolts

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

4.2L header bolts #887093 05/23/08 05:27 AM

Joined: Aug 2003

Posts: 61

Somewhere between Death Valley...

4x4david

Getting the Wheeling Fever

Where is a good website to buy stainless steel header bolts for my 1989 Jeep 4.2L intake/exhaust manifold?
The reason I want SS because I am installing a reman 4.2L engine and install the Hesco/Mopar MPI kit. At the same time I am installing Pacesetter Armour header (orig exhaust header cracked)...if broke...upgrade... My header bolts are rusty and I want to dress-up the engine.
The header bolts have a special washer.
Thanks

Getting the Wheeling fever...

4x4david

Entire Thread
Subject	Posted By	Posted
4.2L header bolts	4x4david	05/23/08 05:27 AM
Re: 4.2L header bolts	BigJim	05/23/08 06:16 AM
Re: 4.2L header bolts	studyb	05/23/08 05:00 PM

Moderated by 4x4Wire

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 4.763s Queries: 15 (3.357s) Memory: 0.5957 MB (Peak: 0.6287 MB) Data Comp: Off Server Time: 2026-05-26 07:29:32 UTC
Valid HTML 5 and Valid CSS