So I got everything torn into to fix a cv boot and I was having trouble getting the axle out so I slipped off the end CV half for more free play. I forgot to make any match marks on it per the manual am I going to be sorry now? Also every post I read it sounds like it shouldn't be hard to get the axle out with the axle where I am at but even with a jack under the A-Arm I still and not getting enough clearance to slide it out. I'm going to loosen the torsion bar tomorrow to get the angle but if there is another way.....

Thanks

1997 T-100 100k and counting Green
5spd 4x4 Ext Cab isr mod Aisin Manual hubs