Pondering...is there interest

Print Thread

Rate Thread

Re: Pondering...is there interest [Re: missouriman] #888450 06/02/08 05:24 PM

Joined: Apr 2000

Posts: 4,230

Roseville, CA, Gateway to the ...

OOP'S

Roll Me Over

Quote

you may have just blown the head gasket.

Then again he could have bent/broken the rods, tweaked the crank, broken some pistons, or poked a hole in a cylinder or two with a broken rod. You will never know until you tear it apart.

David Fritzsche
1990 Ex-Cab V-6,5-speed, with a few mods
04.5 CTD Dodge 2500 Ram--Tow Rig
Roseville, CA

"Serenity through Sobriety"

Entire Thread
Subject	Posted By	Posted
Pondering...is there interest	GOI87	06/02/08 04:54 PM
Re: Pondering...is there interest	missouriman	06/02/08 05:07 PM
Re: Pondering...is there interest	GOI87	06/02/08 05:17 PM
Re: Pondering...is there interest	OOP'S	06/02/08 05:24 PM
Re: Pondering...is there interest	IceBlueT	06/02/08 07:34 PM
Re: Pondering...is there interest	Red_Chili	06/02/08 05:08 PM
Re: Pondering...is there interest	Snowtoy	06/02/08 10:06 PM
Re: Pondering...is there interest	GOI87	06/07/08 02:13 AM
Re: Pondering...is there interest	GOI87	06/07/08 03:30 PM
Re: Pondering...is there interest	oldsub86	06/07/08 05:10 PM
Re: Pondering...is there interest	GOI87	06/07/08 08:36 PM
Re: Pondering...is there interest	Snowtoy	06/08/08 12:33 AM
Re: Pondering...is there interest	GOI87	06/08/08 04:03 AM
Re: Pondering...is there interest	Snowtoy	06/08/08 06:06 AM

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social: