It shouldn't cost you anywhere near $1k, unless you plan to use the same block and rebuild build it the way it was prior to its death.

What condition are the cyls and head in? If the crankshaft is still good, you can get a complete rebuild kit from EB for under $350, and that included the gaskets.

You might also look for a donor rig, like this one <a href="sale-696468591@craigslist.org" target="_blank">$1200 in Dillon</a>. Offer him $800, swap engine/transmission into your rig, part the rest and you should be under $500 for your rebuild.

If you aren't in hurry to get it fixed, you can usually find a good deal. Just keep an eye on Craigslist or Pirate/Marlin BBS's for trucks being parted out.