Wiring the center gauge cluster - 1991

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Wiring the center gauge cluster - 1991 [Re: dwehbie] #889497 06/09/08 07:15 AM

Joined: Jan 2007

Posts: 211

Brite-On, CO

blinkerbox Offline

Wheeler

Look at your dash where the cluster will be positioned. You will see a plastic insert that you need to pop out. The connector will be located in there. You'll need to fish it out. Your Montero came pre-wired with that connector. I had to do the same things when I got my Montero. I fastened the cluster down with some sheet metal screws that had a washer and rubber washer. Good luck!

Last edited by pvdub; 06/09/08 07:22 AM.

'91 RS, '93 SR

Entire Thread
Subject	Posted By	Posted
Wiring the center gauge cluster - 1991	dwehbie	06/08/08 02:32 AM
Re: Wiring the center gauge cluster - 1991	blinkerbox	06/09/08 07:15 AM
Re: Wiring the center gauge cluster - 1991	dwehbie	06/09/08 11:53 AM
Re: Wiring the center gauge cluster - 1991	blinkerbox	06/09/08 03:04 PM

Moderated by 4x4Wire, Macka, Mudraider, off-roader, PHIL_, rxinhed

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.515s Queries: 16 (3.513s) Memory: 0.5993 MB (Peak: 0.6323 MB) Data Comp: Off Server Time: 2026-06-20 07:14:05 UTC
Valid HTML 5 and Valid CSS