Wiring the center gauge cluster - 1991

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Wiring the center gauge cluster - 1991 [Re: blinkerbox] #889498 06/09/08 11:53 AM

Joined: Jul 2001

Posts: 178

Raleigh, NC,USA

dwehbie

Wheeler

Thanks, It worked. Now Just one more question. When I install the oil pressure sending unit, which wire do I use? Do I use the same one going to the oil pressure switch?

1996 Toyota T100

Entire Thread
Subject	Posted By	Posted
Wiring the center gauge cluster - 1991	dwehbie	06/08/08 02:32 AM
Re: Wiring the center gauge cluster - 1991	blinkerbox	06/09/08 07:15 AM
Re: Wiring the center gauge cluster - 1991	dwehbie	06/09/08 11:53 AM
Re: Wiring the center gauge cluster - 1991	blinkerbox	06/09/08 03:04 PM

Moderated by 4x4Wire, Macka, Mudraider, off-roader, PHIL_, rxinhed

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 7.023s Queries: 16 (3.693s) Memory: 0.5989 MB (Peak: 0.6319 MB) Data Comp: Off Server Time: 2026-06-20 19:25:03 UTC
Valid HTML 5 and Valid CSS