injectors not firing

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: injectors not firing [Re: JD9996] #889667 06/09/08 03:51 AM

Joined: Jan 2000

Posts: 12,153

N. California. USA

4Crawler

Web Wheeler

Likely the 3.0 is the same as the 2.4 engine, the grounds run back to the ECU. Usually the ground wires from the injectors tie together and run back to 2 grounded pins on the ECU (No10 and No20 in the 2.4 ECU). Search the forum for "Injector Wire Splice" and and see if that issues applies to your case.

r.c.brown@ieee.org
TruckEditor@tlca.org
Project: 4Crawler
4Crawler OffRoad - 4x4Wire discount code

Entire Thread
Subject	Posted By	Posted
injectors not firing	JD9996	06/09/08 02:16 AM
Re: injectors not firing	4Crawler	06/09/08 03:51 AM

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.513s Queries: 16 (3.511s) Memory: 0.5957 MB (Peak: 0.6287 MB) Data Comp: Off Server Time: 2026-06-15 04:52:59 UTC
Valid HTML 5 and Valid CSS