I've raised my front end with new/used springs and now it seems my driveshaft is a little short. It came apart when I jacked up the front of the truck from the bumper. I was thinking of welding a piece of pipe in at the base of the splined tube that the other shaft slides into. Anybody done this? I don't think balance will be a big issue as I don't use my 4WD anytime except when wheeling, generally low speed. It doesn't snow here so I rarely even use high range when in 4WD. Besides that, my front diff is welded and the truck doesn't steer for crap on the road when engaged. anybody done this? I did a search and came back with nothing.