Do a search for "square shaft"


Basically, you use a 2" diameter inner square tube, and a 2.5" 1/4" wall outter tube, and they slide in and out of each other like a trailer hitch tube. Cut the yokes off your old shaft and weld them up to the square shaft. HEre's mine....

http://home.4x4wire.com/adamf/88/frontshaft.htm

88 4R, 350 V8, R150 5 speed Sold <...uot; />
97 4R, stock, daily driver
98 Sienna, kid and dog hauler, wife's ride