installing a 22r

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

installing a 22r #891515 06/20/08 02:49 AM

Joined: Jun 2008

Posts: 29

87YODA

Getting the Wheeling Fever

I have a 83 22r I am trying to install in my 87 chassis. I have the tranny stabbed in the tranny and 2 bolts in the tranny. But I cant get the engine on the motor mounts. I can get 1 but if I get 1 I cant get the other, is there a trick to this? Also, I was told all the harneses and wiring would be plug and play but a lot of the harneses on the 83 engine done seem to fit any on my 87 chassis just a few, whats the deal?

Entire Thread
Subject	Posted By	Posted
installing a 22r	87YODA	06/20/08 02:49 AM
Re: installing a 22r	dcg9381	06/20/08 08:43 PM
Re: installing a 22r	KiwiCowboy	06/20/08 10:30 PM
Re: installing a 22r	87YODA	06/21/08 03:57 AM
Re: installing a 22r	matts	06/21/08 04:14 AM
Re: installing a 22r	87YODA	06/21/08 04:29 AM
Re: installing a 22r	Snowtoy	06/21/08 08:36 AM

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.398s Queries: 15 (3.396s) Memory: 0.6056 MB (Peak: 0.6386 MB) Data Comp: Off Server Time: 2026-05-27 20:55:27 UTC
Valid HTML 5 and Valid CSS