I recently did a 87 22r to a 83 22r swap. The engine cranks fine and is getting gas but wont start. The plug that goes to the distributor that comes out of the coil shows no voltage. Shown in the first picture. I took 2 wires and ran them from the plugs that had voltage to the plug on the distributor but still no fire. Any ideas? I dont know what else to try? I kept the plug that fits on the 87 alternator and spliced it to make it work with the 83 alternator. I just cant get no darn fire from it. Is there something I am missing or I am over looking that is a commmen problem? Any help or advice is greatly appreciated.