Generation 2 to Generation 1 steering box swap, possible?

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Generation 2 to Generation 1 steering box swap, possible? [Re: bergie] #891855 06/23/08 08:56 PM

Joined: Jun 2006

Posts: 104

Squamish, BC

39ronin

Wheeler

I can only speak about the torsion bars. I had a lifted Pajero and it had the upgraded torsion bars and were also blue. So it would seem likely that they have been upgraded.

Entire Thread
Subject	Posted By	Posted
Generation 2 to Generation 1 steering box swap, possible?	bergie	06/22/08 07:47 AM
Re: Generation 2 to Generation 1 steering box swap, possible?	39ronin	06/23/08 08:56 PM

Moderated by 4x4Wire, Macka, Mudraider, off-roader, PHIL_, rxinhed

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.494s Queries: 16 (3.492s) Memory: 0.5928 MB (Peak: 0.6258 MB) Data Comp: Off Server Time: 2026-06-15 11:37:49 UTC
Valid HTML 5 and Valid CSS