Anyone interested in a brake drum puller?

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Anyone interested in a brake drum puller? [Re: Platarg814] #892641 06/28/08 03:20 PM

Joined: Mar 2004

Posts: 360

Chicoutimi,Canada

Lou

Mudrunner

Mine did same on driver side 2 days ago.
The drum came out using the 2 screws that are inserted in the drum: just remove the screws from their resting place (they have no function at all there) then insert in the 2 threaded holes near the hub center and screw in ...I did some heating with the acetylene torch before so as not to ruin the threads with too much torque. It came off quite easily.

Entire Thread
Subject	Posted By	Posted
Anyone interested in a brake drum puller?	Platarg814	06/25/08 07:41 AM
Re: Anyone interested in a brake drum puller?	Lou	06/28/08 03:20 PM
Re: Anyone interested in a brake drum puller?	Hydra747	07/01/08 07:53 AM
Re: Anyone interested in a brake drum puller?	Lou	07/05/08 01:36 PM
Re: Anyone interested in a brake drum puller?	Platarg814	07/15/08 10:00 PM
Re: Anyone interested in a brake drum puller?	jaboo5322	07/29/08 09:55 PM

Moderated by 4x4Wire, Axe Man, DamKia

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.567s Queries: 16 (3.565s) Memory: 0.6031 MB (Peak: 0.6361 MB) Data Comp: Off Server Time: 2026-06-05 00:41:05 UTC
Valid HTML 5 and Valid CSS