here is my truck mate


it has 34x9.5r15 tsl superswampers
i have had to do a heap to get them to fit under it hey............we sporty lovers in australia dont have the ability to get daves stuff so easy so i have done it the hard way........
4" lifted front springs with a flipped top strut hat(6" in total)
modded bottom arms to bolt the ball joint to the top of the arm not the bottom.......(takes stress of top ball joint)
modded diff mounts to drop front diff housing 1.5"
the rear has had a shiteload of stuff done ......
custom 6" springs
adjustable top arm, adjustable panhard rod
coil drop outs and coil retainers
crossmember behind gear box flipped over and new fuel(gas) tank mount...
1.25" body lift
2" cut out of all guards(fenders) and remade inners guards as well to suite........
bottom back edge of inner guard(fender) in the front was cut of from body at 45degree angle and flat plate was welded into place and body seam in inner guard at the front was flattened and welded.........

was a major job .......but i got em to fit.......
my original tyres were 31" and they didnt scrub with only the suspension lift and that was all.......see what you think........but 31"would be the easier way out hey....... <img src="/forums/images/graemlins/kewl.gif" alt="" />