Stripped thread/missing nut, in frame repair

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Stripped thread/missing nut, in frame repair [Re: DBL_DTY97TJ] #893933 07/03/08 05:05 PM

Joined: Sep 2007

Posts: 44

Scottsdale, AZ

SavageSun4x4 Offline

Getting the Wheeling Fever

I gave a lot of thought and considered several approaches. I settled on this approach for its simplicity, time to effort and strength.

If you have a welder and a cut off wheel this may be your best overall route to take...

Don
Scottsdale, AZ
www.savagesun4x4.com

Entire Thread
Subject	Posted By	Posted
Stripped thread/missing nut, in frame repair	SavageSun4x4	07/03/08 04:47 AM
Re: Stripped thread/missing nut, in frame repair	BobRowe	07/03/08 05:28 AM
Re: Stripped thread/missing nut, in frame repair	DBL_DTY97TJ	07/03/08 03:44 PM
Re: Stripped thread/missing nut, in frame repair	SavageSun4x4	07/03/08 05:05 PM

Moderated by 4x4Wire

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.465s Queries: 16 (3.463s) Memory: 0.5984 MB (Peak: 0.6313 MB) Data Comp: Off Server Time: 2026-06-03 05:19:45 UTC
Valid HTML 5 and Valid CSS