|
|
|
|
Front/back equalize
#895509
07/13/08 02:43 PM
|
Joined: Nov 2007
Posts: 64
OP
Getting the Wheeling Fever
|
Hey all I bought another Raider yesterday. '89 v6 auto. The guy says he installed OME coil springs last year. Is it typical for this to lift the back end up farther than the front? (see photo). If so, will a simple torsion bar adjustment get the front up enough or is this not recommended. I know someone here has been there done that so I'm needing some advice. No crawler project but these rims will be replaced with 16" with 33" tires. Any thoughts? <img src="/forums/images/graemlins/cheers.gif" alt="" /> [img][image] http://i324.photobucket.com/albums/k334/raiderandy/silverraider002.jpg[/img][/image]
'89 Raider 3.0, auto '73 ironhead sportster (compliments of my last Raider and a city of Aurora snow plow):)
|
|
|
|
|
|
OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.
PHP: 7.4.33 Page Time: 3.511s Queries: 15 (3.508s) Memory: 0.6229 MB (Peak: 0.6558 MB) Data Comp: Off Server Time: 2026-06-21 04:59:41 UTCValid HTML 5 and Valid CSS