Front end maintainence

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Front end maintainence [Re: surlynkid] #895775 07/20/08 03:57 AM

Joined: Feb 2005

Posts: 197

Molino, FL

J_Bird

Wheeler

Finished up the bearings today. My roar seems to be gone. I only put about 5 miles on it. Had to go to the beach, for our anniversary dinner(20 yrs.) Anyway, all seems well.
My impacts wont fit in there by the way. I just unscrewed the brake line at the caliper. Put a wire nut on it. Not too messy.
Thanks for the advice.

J-Bird

'95.5 T, SR5, Bone stock w/32x11.50's
'06 Sonata LX

Entire Thread
Subject	Posted By	Posted
Front end maintainence	J_Bird	07/16/08 03:55 AM
Re: Front end maintainence	ErikB	07/16/08 03:49 PM
Re: Front end maintainence	jmoser	07/16/08 05:29 PM
Re: Front end maintainence	J_Bird	07/17/08 03:21 AM
Re: Front end maintainence	surlynkid	07/19/08 05:32 AM
Re: Front end maintainence	J_Bird	07/20/08 03:57 AM

Moderated by 4x4Wire, Dandeman, ErikB, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.567s Queries: 16 (3.565s) Memory: 0.6020 MB (Peak: 0.6350 MB) Data Comp: Off Server Time: 2026-06-05 18:40:19 UTC
Valid HTML 5 and Valid CSS