Should I assume the project?

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Should I assume the project? #895860 07/16/08 07:52 PM

Joined: Apr 2006

Posts: 9

Rochester, NY

xtremetoyz Offline

Need a Spot

Local is selling a reg cab 5 speed V6 4x4, asking 500. I can get it for 3-400 probably. Catch is the rockers are pretty rusty and it needs a HG. What would you guys do? I have a 3/4 ton dodge cummins that I drive daily, and plow with in the winter. Looking to possibly get a beater for two reasons: 1 - I wanna take the short commutes out of the equation with my diesel (my drive to work is 1/8 mile) and 2 - I wanna learn to do body work.

So, would you guys buy it if you were me?

Thanks,
Shawn

Entire Thread
Subject	Posted By	Posted
Should I assume the project?	xtremetoyz	07/16/08 07:52 PM
Re: Should I assume the project?	Greg_Canada	07/16/08 08:31 PM
Re: Should I assume the project?	Richards19884x4	07/16/08 09:28 PM
Re: Should I assume the project?	CJM	07/17/08 01:43 AM

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.650s Queries: 15 (3.648s) Memory: 0.5983 MB (Peak: 0.6313 MB) Data Comp: Off Server Time: 2026-06-22 13:55:32 UTC
Valid HTML 5 and Valid CSS