Somebody check my numbers please.

According to Dodge (cause the Mitsu stealer guys are not nice <img src="/forums/images/graemlins/angry.gif" alt="" />) the most current P/N for the crank bolt is 1101A022 and the washer is MR994412. They said the numbers changed several times from the original number I gave them.

I ordered them for an 89 Raider 3.0, thinking it should be the same. The washer is flat and square shouldered on the ID and OD edge on one side. On the other side it's squared on the OD shoulder and beveled on the ID. I can't remember which side goes toward the crank.

As far as the bolt goes, it's 2.43" long. The diameter and pitch are correct. For some reason I was thinking the bolt was longer.

Any help on this would be appreciated.

EDIT: I remeasured the bolt and corrected my measurements.