Extreme Terrain
4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums


Previous Thread
Next Thread
Print Thread
Rate Thread
Page 2 of 2 1 2
Re: trooper question [Re: bamashooter] #896560 07/24/08 01:21 AM
Joined: Apr 2008
Posts: 135
bamashooter Offline
Wheeler
Are you talking about item numbers 5 and 6? If so, item 5 is part number 8-94442-398-0 and item 6 is part number 8-94442-399-1. The 3 screws have part number 9-93090-408-0. Double check on the screws part # with whoever you order from. I ordered the screws and when they arrived, the heads of the screws were rounded and would not sit flush. The screws you need are flat headed machine screws. Hope this helps
shooter


[Linked Image]

Last edited by bamashooter; 07/24/08 01:37 AM.
Re: trooper question [Re: bamashooter] #896561 07/24/08 05:36 PM
Joined: Jul 2008
Posts: 46
R
rhouser Offline OP
Getting the Wheeling Fever
yeap 5 is what i needed and got it ordered!! what is the best way to tighten down the hub nut?

Re: trooper question [Re: rhouser] #896562 07/24/08 06:16 PM
Joined: Sep 2000
Posts: 4,277
RobG Offline
Roll Me Over
didn't i mention that already? you can just spin it with a flathead screw driver and a light tap from a mallet. you're not gonna crank on it, just enough to get a light preload in the bearings.

-Rob

Re: trooper question [Re: RobG] #896563 07/24/08 06:23 PM
Joined: Jul 2008
Posts: 46
R
rhouser Offline OP
Getting the Wheeling Fever
oh sorry my bad

Re: trooper question [Re: rhouser] #896564 07/25/08 07:44 PM
Joined: Jul 2008
Posts: 46
R
rhouser Offline OP
Getting the Wheeling Fever
i got the lock washer but it doesnt look right, looks too small...i will find out this weekend

Page 2 of 2 1 2







4x4Wire Social:

| 4x4Wire on FaceBook |


OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

Powered by UBB.threads™ PHP Forum Software 7.7.3
(Release build 20190728)
PHP: 7.4.33 Page Time: 0.008s Queries: 16 (0.005s) Memory: 0.6100 MB (Peak: 0.6905 MB) Data Comp: Off Server Time: 2026-06-09 23:41:44 UTC
Valid HTML 5 and Valid CSS