No, no new codes. I tested the A.F.M., but I am not quite sure if I was doing the last step correctly. In the last step it says the resistance between terminal E2 and Vs is supposed to be 20-400 or 20-1000 ohms fully closed, fully closed to fully open. I am not sure if that means when fully closed it is supposed to be between 20 and 400 and when fully open it is supposed to be 20-1000. Or if it is supposed to be somewhere between 20 and 1000 for the entire swing of the door until fully open. At fully closed I am reading in the 180's (within range). At fully open I am reading in the high 200's but anywhere in-between I am reading 1.1k ohms and above. Which is correct?