setting timing - turning but not starting

Print Thread

Rate Thread

Re: setting timing - turning but not starting [Re: BobRowe] #896849 07/26/08 06:22 PM

Joined: Jun 2008

Posts: 12

Texas

lefty915

Need a Spot

Ok, thanks for info. I am pretty sure I am at TDC on compression stroke now, but turns over strong but will not start. Tried priming the carb but only get the spitting hiss noises. Problem originally started when adjusting timing and there was a backfire. Started once after that but not anymore. Maybe time to rebuild carb. What could have happened to carb to cause this? If this is the problem.

Entire Thread
Subject	Posted By	Posted
setting timing - turning but not starting	lefty915	07/23/08 03:48 AM
Re: setting timing - turning but not starting	BigJim	07/23/08 05:44 AM
Re: setting timing - turning but not starting	lefty915	07/23/08 10:27 PM
Re: setting timing - turning but not starting	BigJim	07/24/08 01:45 AM
Re: setting timing - turning but not starting	BobRowe	07/25/08 08:20 AM
Re: setting timing - turning but not starting	lefty915	07/26/08 06:22 PM
Re: setting timing - turning but not starting	BigJim	07/27/08 02:30 AM
Re: setting timing - turning but not starting	lefty915	07/27/08 10:08 PM
Re: setting timing - turning but not starting	BigJim	07/28/08 01:17 AM
Re: setting timing - turning but not starting	oldgreen	07/30/08 11:50 AM
running again but inconsistent	lefty915	08/03/08 08:24 PM
Re: running again but inconsistent	BobRowe	08/03/08 09:07 PM
Re: running again but inconsistent	lefty915	08/04/08 02:46 AM
Re: running again but inconsistent	oldgreen	08/04/08 03:55 PM
Re: running again but inconsistent	BigJim	08/05/08 03:34 AM
Re: running again but inconsistent	oldgreen	08/06/08 10:16 PM

Moderated by 4x4Wire

Hop To

4x4Wire Social: