lower control arm

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: lower control arm [Re: OOP'S] #898139 07/30/08 08:49 PM

Joined: Jun 2000

Posts: 2,453

Torrance, CA

anthony1

Body Damage is Cool

oops, I think he's talking about getting the front half shaft out by droping the lower A-arm.
I'll keep that in mind when I have to replace the it in the field. I think I used a ideler arm puller when I did my SAS.

If you dont't like religeous holidays, go to work.Otherwise, let's call them what they are.
It's freedom OF religion not from.
95-4R,SAS,f/r locked,35MT/R 5spd, 4:1,5.29. my site

Entire Thread
Subject	Posted By	Posted
lower control arm	Bevoman	07/30/08 04:37 AM
Re: lower control arm	Snowtoy	07/30/08 05:21 AM
Re: lower control arm	OOP'S	07/30/08 06:05 AM
Re: lower control arm	anthony1	07/30/08 08:49 PM
Re: lower control arm	DRTDEVL	08/02/08 12:05 AM
Re: lower control arm	RatLabGuy	08/02/08 04:59 AM
Re: lower control arm	OOP'S	08/02/08 09:14 PM

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.581s Queries: 16 (3.578s) Memory: 0.6056 MB (Peak: 0.6386 MB) Data Comp: Off Server Time: 2026-07-16 11:34:10 UTC
Valid HTML 5 and Valid CSS